IN-LINE LUBRICATORS |
Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms. Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor. Installation is recommended within 25 feet of the tool to be lubricated. Refer to the arrow for proper air flow direction. Transparent sight disc allows visual inspectioin of oil level. Oil flow regulated by screwdriver screw adjustment. Not recommended for constant flow applications. Minimum flow rate is 30 SCFM.
|
NPT Sizes | Oil Capacity | Maximum Working Pressure | Air Flow at 70 PSI | Part # | Price |
| 1/2" | 1.4 Fluid ozs. | 500 p.s.i.g. | 30 s.c.f.m. | PL300 | 50.25 | |
| 3/4" | 3.7 Fluid ozs. | 200 p.s.i.g. | 70 s.c.f.m. | PL400 | $52.75 | |
| 3/4" | 11.0 Fluid ozs. | 300 p.s.i.g. | 70 s.c.f.m. | PL400L | $65.45 | |
| 1" | 16.0 Fluid ozs. | 250 p.s.i.g. | 100 s.c.f.m. | PL500 | $87.25 |
Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist. Do not use any synthetic oil or oils containing additive or solvents.
|
Fax: (409) 886-5829 |
|
For More Information...please EMAIL US. |
04/24/2008 dk
