Meets Materials Handling Institute specification IJ 100
for hydraulic hose and assemblies used with jacking systems.

Recommended For: Hydraulic Jack applications. AJ24D has a thick, skive type cover.
TJ24D DIEHARD is suited to applications requiring a light weight, small outside diameter hose. The very high abrasion resistant properties of the cover extend the life of the hose when it is subjected to the abrasion that may cause the premature failure of standard hoses.
Tube: Black, oil resistant synthetic rubber. (Nitrile).
Reinforcement: Two braids of high tensile steel wire.
Cover: AJ24D: Black,oil and abrasion resistant synthetic rubber.“FRAS” Flame Resistant and Anti-Static. Skiving required with Bitelok T200 Series Crimp Couplings and B Series Field Attachable Couplings. TJ24D: Black, extra abrasion resistant and oil resistant rubber. “FRAS” Flame Resistant and Anti-Static. No skiving required with Bitelok T200 Series Crimp Couplings and L Series Field Attachable Couplings. The weight loss of the cover of AJ24D and TJ24D under ISO 6945 method of test for abrasion resistance is less than 10% (less than 0.05 gms) of that allowed by DIN 20022-2SN and EN 853 Type 2SN. Layline branding for easy and permanent identification.
Temperature Range: From -40°C to +49°C (-40°F to +120°F).
Working Pressure: Specification IJ 100 is based on 2:1 minimum burst to working pressure safety factor. RYCO AJ24D and TJ24D hoses have a 2.5:1 safety factor and are suitable for 700 BAR use in hydraulic jack applications ONLY.

Crimp Couplings for above hose