Ryco hydraulic hose fittings assemblies hoses

Meets or exceeds the performance requirements of AS 3791 100R1AT, DIN 20022 - 1SN, EN 853 Type 1SN, ISO 1436 Type 1AT, SAE 100R1AT. “DNV” Det Norske Veritas Type Approval (except RQP116 size).
Recommended For: High pressure hydraulic applications where pressure or temperature requirements exceed the performance requirements of SAE 100R1AT and DIN 20022-1SN, or where resistance to either petroleum-base or phosphate ester fluid is required. May be used with compressed air if working pressure is reduced by 30%, and cover of hose is perforated (pin pricked). Tube: Black, specifically compounded for temperature and chemical resistance. Reinforcement: One braid of high tensile steel wire. Cover:** Blue, oil and abrasion resistant, synthetic rubber. No skiving required with Bitelok T200 & T700 Series Crimp Couplings and K Series Field Attachable Couplings. Temperature Range:* Petroleum-base fluids from -40°C to +150°C (-40°F to +302°F). Water/oil emulsions to +121°C (+250°F). Diesel fuels to +93°C (+200°F). Air to +121°C (+250°F) (maximum working pressure must be reduced by 30%). Some phosphate ester fluids in the temperature range of -40°C to +82°C (-40°F to +180°F). Not suitable for use with aerospace type phosphate esters such as Monsanto Skydrol 500B, Stauffer Aero-Safe 2300W and Chevron Hy-jet IV.
Flame Resistance: Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labour, Mine Safety and Health Administration. Complies with Flame Resistant requirements of Australian Standard AS2660 and Method of Test AS1180.10B. Couplings: Bitelok T200 Non-Skive One Piece (sizes 1/4” to 1”) Bitelok T700 Non-Skive One Piece (sizes 3/8” to 1”) Field Attachable K Series (sizes 1/4” to 1”)	Crimp Couplings for above hose

*Field Attachable Couplings should not be used on RQP1 Hose at maximum working pressure when
temperature exceeds 121 0 C (250 Deg F). Field Attachable Couplings may be used on RQP1 Hose at over
121 Deg C but at reduced working pressure.