Meets or exceeds the performance requirements of AS 3791 100R2AT,
DIN 20022 - 2SN, EN 853 Type 2SN, ISO 1436 Type 2AT, SAE 100R2AT.
“DNV” Det Norske Veritas Type Approval is pending.

Recommended For: High pressure hydraulic applications where pressure or temperature requirements exceed the performance requirements of SAE 100R2AT and DIN 20022-2SN, or where resistance to either petroleum-base or phosphate
ester** fluid is required. May be used with compressed air if working pressure is reduced by 30% and cover of hose is perforated (pin pricked).
Tube: Black, specifically compounded for temperature and chemical resistance.
Reinforcement: Two braids of high tensile steel wire.
Cover: Blue, oil and abrasion resistant, synthetic rubber. No skiving required with Bitelok T200 & T700 Series Crimp Couplings and L Series Field Attachable Couplings*.
Temperature Range: Petroleum-base fluids from -40°C to +150°C (-40°F to +302°F); water/oil emulsions to +121°C (+250°F); diesel fuels to +93°C (+200°F).
Air to +121°C (+250°F) (max. working pressure must be reduced by 30%).
Some phosphate ester** fluids in the temperature range of -40°C to +82°C (-40°F to +180°F).
**Not suitable for use with aerospace type phosphate esters such as Monsanto Skydrol 500B, Stauffer Aero-Safe 2300W and Chevron Hy-jet IV.
Working Pressure: Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.

Crimp Couplings for above hose