Ryco hydraulic hose fittings assemblies hoses

aeroquip hydraulic hose fittings assemblies hoses

Ryco Hydraulics

Higher Technology equals Greater Performance

Hydraulic Hose - Picture Index

Meets or exceeds the performance requirements of SAE 100R1AT, AS 3791 100R1AT, DIN 20022 - 1SN, EN 853 Type 1SN, ISO 1436 Type 1AT. “GL” Germanischer Lloyd Type Approval to -20 size with T200 and T700 Series Couplings. “DNV” Det Norske Veritas Type Approval. US Coast Guard - SAE 1942 Type Approval for Hydraulic Systems.
Recommended For: High pressure hydraulic oil lines. Tube: Black, oil resistant synthetic rubber. (Nitrile). Reinforcement: One braid of high tensile steel wire. Cover: Black, oil and abrasion resistant synthetic rubber. No skiving required with Bitelok T200 & T700 Series Crimp Couplings and K Series Field Attachable Couplings. Temperature Range: From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 175. Working Pressure: Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.
Flame Resistance: All sizes meet Flame Resistant Designation “GL” Germanischer Lloyd. T124A and T132A meet Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration. Couplings: BITELOK NON-SKIVE ONE PIECE CRIMP T200 (sizes 1/4” to 1.1/4”) pages 82 to 97. T700 (sizes 3/8” to 2”) pages 102 to 113. Assembly Instructions page 180. FIELD ATTACHABLE K Series (sizes 1/4” to 1”) refer to RYCO. *A Series (sizes 1.1/4” to 2”) refer to RYCO.	Crimp Couplings for above hose

*When using A Series Field Attachable Couplings on T1A Series Hose, cover of hose must be skived at ends.

tollfree.jpg (15043 bytes)

Fax: (409) 886-5829

Terms and Conditions of Sale

creditcards.jpg (6097 bytes)

For More Information...please EMAIL US.