Ryco hydraulic hose fittings assemblies hoses

aeroquip hydraulic hose fittings assemblies hoses

Ryco Hydraulics

Higher Technology equals Greater Performance

Hydraulic Hose - Picture Index

Meets or exceeds the performance requirements of AS 3791 100R2AT, DIN 20022 - 2SN, EN 853 Type 2SN, ISO 1436 Type 2AT, SAE 100R2AT. “GL” Germanischer Lloyd Type Approval to -20 size with T200 and T700 Series Couplings. “DNV” Det Norske Veritas Type Approval is pending.
Recommended For: High pressure hydraulic oil lines. Tube: Black, oil resistant synthetic rubber. (Nitrile). Reinforcement: Two braids of high tensile steel wire. Cover: Black, oil and abrasion resistant synthetic rubber. No skiving required with Bitelok T200 & T700 Series Crimp Couplings and L Series Field Attachable Couplings. Temperature Range: From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. Working Pressure: Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.
Flame Resistance: Meets Flame Resistant Designation “GL” Germanischer Lloyd. T224A, T232A and T240A also meet Flame Resistant Designation “U.S. MSHA” of the US Department of Labour, Mine Safety and Health Administration. Couplings: Bitelok T200 Non-Skive One Piece (sizes 1/4” to 1.1/4”) Bitelok T700 Non-Skive One Piece (sizes 3/8” to 2”) Field Attachable L Series (sizes 1/4” to 1.1/4”) Field Attachable B Series (sizes 1.1/2” and 2”) 1200-40 Skive Two Piece (size 2.1/2”)	Crimp Couplings for above hose

tollfree.jpg (15043 bytes)

Fax: (409) 886-5829

Terms and Conditions of Sale

creditcards.jpg (6097 bytes)

For More Information...please EMAIL US.