"MATCHLESS" BELLOWS-TYPE EXPANSION JOINTS

Metal Bellows Expansion Joints have been designed to absorb a specified amount of movement by flexing of the thin-gauge convolutions.  If proper care is not taken during installation, it may reduce the cycle life and the pressure capacity of the expansion joints which could result in an early failure of the bellows element or damage the piping system.

The following recommendations are included to aviod the most common errors that occur during installation.  When in doubt about an installation prodedure, contact Hosexpress for clarification before attempting to install the Expansion Joint.

If you have any questions about the suitability of a hose for a particular service, contact Hosexpress, (Toll Free 1-866-397-4673), for a recommendation.