Cam and Groove: Andrews Cam and Groove, EZ-Boss Lock Cam and Groove, Adapters, Dust Plugs, Couplers, Reducing Couplers, Cam and Groove Fittings, Spool Adapters, Spool Couplers, Saddles, Fittings, Specialty Items, Flange Drilling, Aluminum Couplers, Brass Couplers Malleable Iron Couplers, Stainless Steel Couplers

EMAIL AIR FITTINGS BAND-IT CLAMPS CAMLOCK FITTINGS DUCTING HOSE GASKETS GAUGES GARDEN HOSE HOSE HOSE REELS HYDRAULIC HOSE METAL HOSE PVC HOSE PVC TUBING PUSH-IN FITTINGS VALVES CATALOGS Home

"EZ BOSS-LOCK" CAM AND GROOVE
"EZ BOSS-LOCK" - Specifications Accessories

No more fumbling with clamps, wire, clips or pins.. Just close the handles and the locking mechanism is engaged.

ezbosslock1.jpg (5956 bytes)

Unlike other safety couplings.......

  • The EZ Boss-Lock is extremely EASY TO OPEN!!! The release lever is under your thumb when you want to open the fitting. ERGONOMIC.
  • The EZ Boss-Lock is resistant to accidental disconnection when being dragged.  The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm!!!
  • The EZ Boss-Lock alerts you if it is not properly engaged. If the rotating lever is not flush with the handle, it is not properly engaged.
  • The EZ Boss-Lock has no sliding pins to jam.  The EZ Boss-Lock's rotating action helps keep the locking device free of debris.
  • The EZ Boss-Lock has no sliding pins to pop open.  The EZ Boss-Lock is designed to protect critical parts from impact and to withsatnd rugged use.
  • The EZ Boss-Lock can be supplied with special shanks custom suited to yor needs.  The EZ Boss-Lock is available with Swaged and PF shank designs, for hard to couple chemical hoses.
  • The EZ Boss-Lock cam arm assemblies are made of investment cast Stainless Steel with plated Carbon Steel pull rings.
  • The EZ Boss- Lock is easier to insert into the hose tubes on Tank Trucks, and easier to use in restricted spaces. This is due to the smaller maximum O.D. and more snag free exterior.
  • The EZ Boss-Lock Cam Arm assemblies can be retrofitted onto Undamaged Stainless Steel Boss-Lock. This allows you to protect your investment in Stainless Steel Boss-Lock couplings while you upgrade.
  • The EZ Boss-Lock is Made in the USA.
 andicon1.jpg (2141 bytes)

Type A Adapters

 andicon2.jpg (2206 bytes)

Type F Adapters

 andicon3.jpg (2131 bytes)

Type E Cam and Groove Adapters
andicon4.jpg (2016 bytes)

Type DP Dust Plugs

 andicon12.jpg (2165 bytes)

Cam and Groove Gaskets

 ezicon1.jpg (3136 bytes)

Type C Coupler
ezicon2.jpg (2851 bytes)

Type D Coupler

 ezicon3.jpg (2861 bytes)

Type B Coupler

 ezicon4.jpg (3182 bytes)

Reducing Couplers X Adapters
ezicon5.jpg (2294 bytes)

Type H Dust Cap

 ezicon6.jpg (2543 bytes)

"EZ Boss-Lock" Handles

 teflongasketicon.jpg (2966 bytes)

Teflon Gaskets

Specifications - "EZ BOSS-LOCK" Cam and Groove

("EZ BOSS-LOCK" Couplers and Adapters Maximum Working Pressure)
Sizes 1/2" 3/4" - 2" 2 1/2" 3" 4" 5" & 6"
PSI 150 250 150 125 100 75

Pressure Ratings:

Recommendations based on the use of mating fittings at ambient temperature (70degree.jpg (691 bytes)F) with standard Buna-N Seal installed.  For use at elevated temperature or other unusual operating conditions, consult the factory.

 

tollfree.jpg (15043 bytes)

Fax: (409) 886-5829

Terms and Conditions of Sale

creditcards.jpg (6097 bytes)

For More Information...please EMAIL US.
 

tag.jpg (9425 bytes)