Rubber Expansion Joints

	"SUPREME" Spool Style 150		Superflex Style 1000
	Unaflex "Supreme" Arch-type 150 expansion joints are the WORKHORSE of our line. For Pressure and Vacuum applications, basic construction consists of tube, flange, carcass, internal steel reinforcements, cover and steel retaining rings.		The Superflex 1000 provides double arch movements utilizing a single low profile wide arch. Manufactured utilizing tire industry technology the Style 1000 has been designed to provide greater strength and pressure capabilities.
	"SUPREME" Lightweight Style189		Superflex Style 1100
	Unaflex "SUPREME" Lightweight style 189 rubber expansion joints are available in round, or rectangular with arch, configurations. They are recommended for pressure and limited vacuum applications such as air, gas and water service where pressures are slight and duty not severe.		The 1100 Series Expansion Joint, a value packed Expansion Joint. The cover has been formulated with an ozone and temperature resistant compound which prevents the Style 1100 from cracking unlike imports.
	"SUPREME" Spool Style 200 XL		"DURA-PERM" Styles 150 and 200
	Unaflex "Supreme" Arch-type 200 XL expansion joints are the WORKHORSE of our line. For Very High Pressure Service applications, basic construction consists of tube, flange, carcass, internal steel reinforcements, cover and steel retaining rings.		Unaflex "DURA-PERM" Styles 150 and 200 Expansion Joints combine the best features of Teflon chemical resistance, anti-stick properties, thermal stability, and resistance to age cracking - with the best features of elastomeric expansion joints - good noise and vibration dampering.
	"UNASHPERE" Style 800		Style 600 Flue Duct Expansion Joints
	The Unasphere is precision molded of neoprene and nylon. It requires less force to move than conventional expansion joints allowing maximum deflection, elongation, and compression.		Style 600 Rubber Flue Duct Expansion Joints are designed to handle hot air or gases in industrial duct work, as well as those generated by power plant and pollution control equipment.
	Typical Applications		Definition of Movement
	Industrial Piping installations are one of the most important locations for Unaflex Expansion Joints as they compensate for the thermal expansion and contraction in the line as well as reduce the transmission of noise and vibrations. Also for Heating/Air conditions and ventilating, Marine Applications and Central Power Stations/Plants.		Definition of Movement for Rubber Expansion Joints explaining Axial Compression, Axial Elongation, Transverse or Lateral Movement, Vibration Absorption and Angular Movement.
	Expansion Joint Types		"UNASHPERE" Style 802
	Offering the greatest variety of Expansion Joints available to industry. Extensive inventory of standard products such as....Tapered Joints, Offset Joints, Sleeve-Type Joints, Filled Arches, Multiple Arches, Rectangular, No arch, and Wide Arch.		The Twin-sphere is precision molded of neoprene and nylon tire cord. The double arch design allows for greater movement four different ways and provides a non-turbulent flow.
	"UNASHPERE" Style 803		"MUTI-PURPOSE" TFE Styles 112-A and 113-A
	This highly capable, low cost expansion joint is available for smaller diameter piping systems found in power plants, chemical plants, waterworks, sewerage residences, etc.		Expansion Joints Styles 112-A and 113-A are solid-molded of Teflon and specially designed to withstand the higher pressures and temperatures in today's piping systems.
	"RADI-FLEX" Elbow Expansion Joints		"Crosses, Tees" and Special Products
	Unaflex "Radi-Flex" Elbow Expansion Joints are designed to reduce noise and vibration. Their flexibility also prevents damage to equipment from pipe line expansion and contraction. Spiraled steel wires are embedded in the walls from flange-to-flange for extra strength.		Unaflex Crosses and Tees are custom manufactured to your specifications with all the features of our Elbow Joints.
	Unaflex Styles 145, 155, 156, 157, 185 U-Type Expansion Joints		"UNA-FLO" 2000
	U-Type Expansion Joints form a flexible connection between equipment outlet and inlet flanges. They are normally constructed of a natural rubber tube, several heavy plies of rubber or neoprene-impregnated fabric, and a neoprene cover to protect the carcass.		THE EXPANSION JOINT FOR THE NEW MELLENNIUM!.....The wide, low profile, self cleaning arch provides maximum movement, while eliminating the need of a filled arch for slurry service and requirements where reduced turbulence is desired. Light weight for ease of installation save on labor costs as well as reduced freight costs.
	Styles 3150 and 3250 Rubber Vibration/Sound Absorbers
	Styles 3150 and 3250 Vibration and Sound Absorbers are designed with molded rubber flanged ends with bolt holes that accommodate standard steel flanges. They are furnished with or without helical wire reinforcement. Special tubes can be compounded to meet unique service condition in either suction or discharge applications.

If you have any questions about the suitability of a hose for a particular service, contact Hosexpress, (Toll Free 866.397.4673), for a recommendation.

THE ADVANTAGES OF RUBBER EXPANSION JOINTS AND FLEXIBLE CONNECTORS
Prevents stress due to expansion and contraction. Insulates against the transfer of noise and vibrations. Compensates for misalignment No electrolysis	Greater recovery from movement Freedom from corrosion Ease of installation Small space requirements