AIR FITTINGS BAND-IT CLAMPS CAMLOCK FITTINGS DUCTING HOSE GASKETS GAUGES GARDEN HOSE HOSE HOSE REELS HYDRAULIC HOSE METAL HOSE PVC HOSE PVC TUBING PUSH-IN FITTINGS VALVES CATALOGS Home

Series T Hose Reels

 

 
  • Reel supported on both sides by pedestal style base and arms.
  • Reels with fuel hose & dual hydraulic hose available in this Series. See Charts.
  • Reels with fuel hose have non-sparking locking mechanism.
  • Triple support points to the center shaft give maximum strength.
  • Extra large mounting base provides greater stability.
  • Fully automatic self-retracting reel wraps, stores, & protects hose.
  • High-quality steel construction & durable epoxy powder-coat finish.
  • 1/4" steel base & support posts add rigidity & reducing vibration.
  • Triple supported 1" solid steel axle with 1" self-lubricated precision bearings.
  • Heavy ribbed steel discs with rolled edges for maximum strength & safety.
  • Factory-balanced cartridge-style spring motor is lubricated, sealed & long lasting.
  • Non-corrosive 1/4" zinc-plated steel lock ring with stainless steel lock dog & spring.
  • Solid brass NPT swivel with stainless steel stud for non-corrosive strength & performance. (Zinc Plated steel swivels on HP models)
  • Swivel O-ring seals supported by Teflon? backup rings that warrant consistency & durability.
  • Multi-position locking ratchet easily secures hose at desired length.
  • Guide arm adjusts for various mounting positions including wall, floor, ceiling, & vehicle.
  • Detachable roller-guide with smooth rollers eliminates pinching & reduces hose wear.
  • Protective spring guard on inlet protects hose from rubbing & wearing.
  • Adjustable solid rubber hose stop for convenient lead length positioning.

 

         

low pressure | Medium Pressure | high pressure

 

Low Pressure Retractable Hose Reels

 

The standard hose is for air or water service only. The basic reel without hose can be used for air, water or oil. Maximum temperature 150 degrees Fahrenheit.
DO NOT EXCEED RATED PRESSURE 
MODEL WITH HOSE  SIZE
INDEX
 CHART		 LESS HOSE
 I.D. O.D. FT.
PSI
 APPRX.
SHIP
LBS.		  MODEL PSI APRX.
LBS
TSH-N-350 3/8" 21/32" 50 300 66 1 TSHL-N-350 300 58
TSH-N-375 3/8" 21/32" 75 300 90 3 TSHL-N-375 300 80
TSH-N-3100 3/8" 21/32" 100 300 97 3 TSHL-N-3100 300 81
TSH-N-3125 3/8" 21/32" 125 300 103 3 TSHL-N-3125 300 82
TSH-N-450 1/2" 27/32" 50 300 75 2 TSHL-N-450 300 63
TSH-N-475 1/2" 27/32" 75 300 92 3 TSHL-N-475 300 76
TSH-N-4100 1/2" 27/32" 100 300 102 3 TSHL-N-4100 300 81
TSH-N-535 3/4" 1-5/32" 35 300 84 5 TSHL-N-535 300 72
 TSH-N-550 3/4" 1-5/32" 50 300 94 5 TSHL-N-550 300 75
 TSHF-N-550* 3/4" 1-5/32" 50 250 94 5 TSHL-N-635 300 75
TSH-N-635 1" 1-7/16" 35 300 87 6
TSHF-N-635* 1" 1-7/16" 35 300 87 6
*These models are supplied with fuel hose

 

 

Medium Pressure Retractable Hose Reels

 

Reels are furnished standard with S.A.E. 100R1 AX thin cover one wire braid hose suitable for air, water or oil applications. Maximum temperature 250 degrees Fahrenheit.
MODEL WITH HOSE  SIZE
INDEX
 CHART		 LESS HOSE
 I.D. O.D. FT.
PSI
 APPRX.
SHIP
LBS.		  MODEL PSI APRX.
LBS
TMP-N-350 3/8" 5/8" 50 3000 72 2 TMPL-N-350 3000 61
TDMP-N-350* 3/8" 5/8" 50 3000 101 7 TDMPL-N-350 3000 83
TMP-N-375 3/8" 5/8" 75 3000 94 3 TMPL-N-375 3000 76
TMP-N-3100 3/8" 21/32" 100 3000 100 3 TMPL-N-3100 3000 82
TMP-N-450 1/2" 3/4" 50 2500 77 2 TMPL-N-450 2500 64
TDMP-N-450* 1/2" 3/4" 50 2500 105 7 TDMPL-N-450 3000 83
TMP-N-475 1/2" 3/4" 75 2500 97 3 TMPL-N-475 2500 76
TMP-N-4100 1/2" 3/4" 100 2500 104 3 TMPL-N-4100 2500 76
TMP-N-525 3/4" 1" 25 1250 72 4 TMPL-N-525 1250 63
TMP-N-535 3/4" 1" 35 1250 86 5 TMPL-N-535 1250 75
TMP-N-550 3/4" 1" 50 1250 91 5 TMPL-N-550 1250 75
*These models are designed for dual-hydraulic hose applications.

 

 

High Pressure Retractable Hose Reels

 

Reels are furnished standard with S.A.E. 100R2 FX thin cover two wire braid hose suitable for grease and hydraulic oil applications. Maximum temperature 250 degrees Fahrenheit.
MODEL WITH HOSE  SIZE
INDEX
 CHART		 LESS HOSE
 I.D. O.D. FT.
PSI
 APPRX.
SHIP
LBS.		    MODEL PSI APRX.
LBS
THP-N-150 1/4" 17/32" 50 5000 75 2 THPL-N-150 5000 64
THP-N-175 1/4" 17/32" 75 5000 98 3 THPL-N-175 5000 83
THP-N-1100 1/4" 17/32" 100 5000 105 3 THPL-N-1100 5000 83
THP-N-350 3/8" 43/64" 50 4000 79 4 THPL-N-350 4000 64
THP-N-375 3/8" 43/64" 75 4000 103 5 THPL-N-375 4000 81

 

 

 

Reel Dimensions

 

 
SIZE
INDEX		 A B C D E MOUNT
L-M
1 8-3/4" 21-3/16" 19-5/8" 8" 9" 7"-8"
2 9-1/4" 21-3/16" 19-5/8" 8" 9" 7"-8"
3 9-1/4" 25-1/2" 23" 8" 9" 7"-8"
4 9-3/4" 21-3/16" 19-5/8" 8" 9" 7"-8"
5 9-3/4" 25-1/2" 23" 8" 9" 7"-8"
6 10" 25-1/2" 23" 8" 9" 7"-8"
7 10-3/4" 25-1/2" 23" 8" 9" 7"-8"

 

 

Available Options & Parts Breakdown

AVAILABLE OPTIONS
 
  MOUNTING BRACKET: #MR-1 - For overhead mounting, fits 3" to 81⁄2" flange on "I" or "H" beam. Powder coated crinkle black 3⁄16" bent steel. Weight: 13 lbs. SWING BRACKET: #15725 - For vertical surface mounting, allows reel to swing 180˚. Powder coated crinkle black 3⁄16" steel. Weight: 5 lbs.
             
Please call to order SWIVEL BRACKET: #15721 - For horizontal surface mounting, ball bearing rotation, allows reel to swivel 345˚. Powder coated crinkle black heavy gauge steel.Weight: 6 lbs.  

 

 

 

 

tollfree.jpg (15043 bytes)

Fax: (409) 886-5829

Terms and Conditions of Sale

creditcards.jpg (6097 bytes)

For More Information...please EMAIL US.
 

tag.jpg (9425 bytes)