Spiral Clamps

Spiral clamps are used on convoluted cover hoses. Choose the style of clamp needed for your hose by looking at the end of the hose; and if the helix spirals in a clock wise direction away from you then a right hand clamp will be needed. If the helix spirals in a counter clockwise direction away from you, then a left hand clamp is needed for the job. With professional holding power, a single spiral clamp can be used on each of the 1 ½”-4” ID hose ends. For 5” ID hoses and larger, two clamps are recommended. Both hex nuts should be tightened equally to prevent any leakage.

Spiral Clamp Specifications

All kinds of sizes, as you require
High quality with the best service and price
Designed for use on Tigerflex hoses that are designed with spiral helix outer cover
Threaded protective cap for safety

Note: Due to potential clamp damages caused by excessive torque, a pneumatic air tool is not recommended